Sunday 19 October 2014

Milestone Event


I took advantage of the fine weather yesterday to work outside and paint the final coat of antifoul and topside paints.  Using a roll and tip method went very quickly, thanks to assistance from Siobhan,  and I noticed that the paint dried much quicker than previously when working inside my small garage.

I had a call from my sail maker to say he could be here tomorrow to measure the mast bend before making the sails!  So that spurned me on to  attach the shroud plate and forestay tang in order to step the mast.  Brian came along to help but then I noticed that I had made two forestay tangs and a jib halyard tang in bronze but missed out on the mast shrouds.... So I had to jury rig up two shroud plates out of some galvanized door hinges which were remarkably suited to the task - even if they are only temporary.

First we clamped the shroud plates and tang to the specified positions on the mast to make sure that the shrouds and forestay were the correct lengths, as the bronze bottle screws are quite small and don't allow for much adjustment.

This proved a good idea, as it allowed us to drill and screw the plates at exactly the right height.  I noticed that the mast is turned slightly in the mast step, so I have slight adjustments to make in the tenon at the bottom of the mast, but nonetheless, it was a great feeling to finally step the mast and stand back and look at the boat in her nearly completed state.

You can see where the foredeck meets the coaming that the paint line is irregular - despite a number of attempts.  I'm think I may need to apply a rounded epoxy bead to ensure a cleaner fit - unless others have suggestions.

Quality Control Officer....

8 comments:

  1. Stunning!
    Well done, she looks amazing.

    ReplyDelete
  2. Hi Paul,
    Your boat looks so fine. Really lovely. The reddish topsides look good against the varnished mahogany. And your choice to keep the shear strake and stem bright is something I might have to consider. (It's not too late for me, yet.

    Something I've been curious about since starting my SS.... How much effort does it require to step the mast? Is this a one person task?

    You must be itching to sail. I hope you get to soon!

    Jeff

    ReplyDelete
  3. Hi Jeff - Actually stepping the mast was easier than I had expected, 'though I did have a helper and it is a hollow DF birdsmouth construction. I would be temped to do it solo - also I am sure you could rig up some mechanism to keep the mast base from running off before it is vertical. BTW, I am following your thread on wooden boat and your build looks first class. All the best, Paul

    ReplyDelete
  4. Looking amazing Paul !! Congrats...

    ReplyDelete
  5. Hi Paul - hull and sides look really cool, what red paint did you use?

    Regards
    Clive

    ReplyDelete
  6. Hi! your work and its posting with pictures is appreciable. It is totally full of important information.
    dinghy foot pump

    ReplyDelete
  7. This story reminded me of how I began in the great hobby of building boats.

    As a child, my dad would take me to the harbor and I would watch the boats bring in their catch for the day. It all seemed very magical to a young boy.

    I started building tiny model boats but due to our familie's financial situation, I could never graduate to building a "real" boat.

    Fortunately, when I grew up and started working, I was able to afford to build bigger boats. However, the plans that I found were incredibly difficult to understand and I never got past the "half-finished" stage.

    I was on the verge of giving it all up. Luckily for me, I came across some easy-to-follow instructions that have allowed me to complete some wonderful boats.

    I could go on and on, but you would do well to check out the plans for yourself:

    http://www.bestquicktips.com/boatplans

    Hope it helps anyone reading this!

    ReplyDelete
  8. https://marinecityhardware.com/

    Here at Marine City Hardware, we specialize in marine hardware products. We are all family and are all working together to bring our customers exactly what they need. Our motto is high quality, low prices, fast shipping and taking care of our customers. 
    Everything is double checked and electronically tested before being sent out to ensure the highest quality

    ReplyDelete